12/26/15 = bikes in progress, end of the year build queue - check it out!

 A 29er for Bend, OR = done!

 It's nice to be back into MTB's

 It's been stupid cold here, so getting some work done.

 And then on into a 650B / 27.5"

 Tubing rounded up.

 Fits checked for proper H2O placement

 Cleaned & tacked

 Then all brazed up.

 Now being polished out!

So, here is the remaining build queue until I take a sabbatical for a few months to catch up on so many things that have been piling up for the last 10 years, including working on my old trashed body!  

 I will not take deposits in January like I have the last three years, and if you are in the "Hold" list when I build out the last of the queue, then you will receive your deposit back at this time as to have a clean slate, *but*, when I start up again, if you choose, you can have 1st dibs on a build - I just can't hold onto deposits through this period.

When I start back up, there will be new models, prices, practices and offerings as the bike world is changing fast.......and I will be perusing the new offerings and "Standards" to ascertain what I will be offering.

So, here is the build queue:
JP: Off to paint post holiday.
JJ: On Deck.
N. Tritle: Next.

Then: Dana E, A. Kohl, Don B, Perry D, Eric P, Chris R, John U, Stu L, Jason R, David T, BT, Matt F, Tom F.
 Getting short!

HOLD: B. Siebersma, Steve H, Kip M, Paul E, Steve H, Pav x 2, Craig M.

There you all go, happy Soulstice!
 - Steve.

What's up at Coconino Cycles 12/12/15

 Another Dirt Roadster start to finish

 Vent holes, then tacking & brazing

 A nice uni for this build

 Chased, faced, reamed, checked.........

 And polished.

 Lots going on in this area.

 Custom forks are allot of work

 Bent the bender, fixed the bender.

 This build has parts ranging from 1994 to 2015

 And now a MTB & some wheel building

 Yep.

 Starting to look like a proper MTB!